At 10:41 PM 6/21/02 -0400, KD6BGO@aol.com wrote:
> Hey, is it possible to remove and replace a camshaft on an MGB without
> removing the oil pump?
Yes.
You don't have to remove the pan or the oil pump, you can sneak the cam
past the oil pump drive gear. You may not have to remove the dizzy drive
gear either to remove the cam, but why fight it? When you reinstall the
cam you will have to R&R the dizzy drive gear to reset the gear
orientation, so might as well take it out first. Just don't drop the
distributor drive gear into the sump, or you become this week's DCM. <8^(
Barney Gaylord
1958 MGA with an attitude
http://www.ntsource.com/~barneymg
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|