At 08:25 PM 5/9/02 -0400, Mike Razor wrote:
>Busted bow on MGA top, nobody around to weld anything .... It is one of
>the static bows that is held on by two screws on each end. I wonder if JB
>weld would be strong enough to hold. ....
You need to insert a pin inside of the tubing, a piece of metal round stock
about 2" long should do it, and completely fill the joint with JB
Weld. Will likely be stronger than the original tubing.
Barney Gaylord
1958 MGA with an attitude
http://www.ntsource.com/~barneymg
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|