In my experience, Eezibleeds (sp?) can work very well.
The problem is getting a good seal onto the master cylinder. The trick is to
recognize that the eezibleel will work quite well with 5 pounds of pressure.
If you start with your pressure source at 10 pounds or less and let it go
down to 5 while using the system, you should not have any problems.
For sealing the cap onto my MGA's master cylinder, I find that garden hose
seals work quite well. I would not use one of these seals long term, but I
rather doubt that any serious chemical interactions will take place in the
short time the eezibleed is in use.
Simon
_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|