Very true - for HS carbs. I've never seen an HIF with a float that doesn't
have an adjustment tang, though, and I must have rebult literally hundreds
of pairs of these SUs over the last 27 years.
Lawrie
British Sportscar Center
----- Original Message -----
From: "Max Heim" <mvheim@attbi.com>
To: "MG List" <mgs@autox.team.net>
Sent: Thursday, March 28, 2002 2:10 PM
Subject: Re: Float Level Checking
> I thought I should add that if you DON'T have metal tangs on the floats
> (which can happen when the floats have been replaced by a PO), you can
still
> adjust the height by adding or subtracting washers under the base of the
> needle valve.
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|