I am just catching up to this thread. And, don't know the beginnings of it.
However, I have a 4-synch o.d. trans in my '66. Only changes needed were a
"bump out" for the starter, and to cut out a section of the tunnel over the
shifter. I don't remember exactly what I did. But, seems to me I used a
section of the tunnel from the '69 I scrapped a few years ago after
stripping all parts from it. I then screwed the new piece in place & bent
the shifter boot retaining ring to fit the shape. Looks & works fine. If
anyone thinking of doing this wants jpegs, let me know. I'll send them
off-list.
Norm Sippel
'66 MGB with lots of later parts & pieces
///
/// mgs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
///
|