IMHO you should check your carb set-up. Flush with the bridge is pretty
LEAN.
The recommended starting point is 2 turns DOWN from flush.
Also, if your race cam is long duration, try setting your idle speed around
1100RPM
HTH
Jim
74 CBB
77 RBB
> -----Original Message-----
> From: owner-mgs@autox.team.net [mailto:owner-mgs@autox.team.net]On
> Behalf Of Jeff Sharpe
> Sent: Sunday, March 17, 2002 8:15 PM
> To: MG List
> Subject: Lumpy idle - more
>
>
> Out of town this weekend and just read your replies - very much
> appreciated.
> One more thought after mulling it over for a couple days. The
> initial set-up
> of the carbs with the jets flush with the bridge, the RPM's rise
> when lifting
> the pistons slightly. That's already too rich, isn't it? I'm
> wondering if
///
/// mgs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
///
|