It *is* possible to put the outer races into the hub the wrong way, but if
you consider how you are going to get the tapered rollers and inner races in
*afterwards* you should be OK. If fact if you did get them in the wrong way
you would probably be well-stuffed, because the flange in the hub would
probably cover the bearing and you wouldn't be able to get them out again.
----- Original Message -----
From: "Alford, James" <alfordj@hhmi.org>
To: "MGB LIST (E-mail)" <mgs@autox.team.net>
Sent: Thursday, March 14, 2002 2:04 PM
Subject: Front Wheel Bearings
> Is it possible to put the bearings in backwards? If so, how do you tell
> which way they go?
///
/// mgs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
///
|