Hey David, do your carbs have the small vent holes? Should be either in the
cap or the top of the dashpot. Could be that they are missing or plugged?
Gordie
> Not very pretty but in desperation I would drape a short length of wire or
> something over the top of the damper cap and down the sides of the dashpot
> cover and secure it with a hose-clip.
>
> ----- Original Message -----
> From: "David Councill" <dcouncil@imt.net>
> To: <mgs@autox.team.net>
> Sent: Wednesday, February 13, 2002 3:46 AM
> Subject: Re: Carb question, grinding into third
>
>
> > At 02:56 PM 1/27/2002 +0000, paul.hunt1@virgin.net wrote:
> > >1. Screw it back in, but if it does it again the threads have been
> > >stripped, probably on the plastic damper screw.
>
> > I will know tomorrow if I'm successful. Otherwise I am at a loss as I
have
> > tried everything from different dashpots, new dashpot dampers, new
gaskets
> > (and now without).
///
/// mgs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
///
|