Once you have removed the shock-absorber, or either the top or bottom bolt,
just push the spring pan down and you should be able to pull the spring out.
----- Original Message -----
From: "David Councill" <dcouncil@imt.net>
To: <mgs@autox.team.net>
Sent: Saturday, February 09, 2002 5:26 PM
Subject: spring compressor
> What can I use to compress the front springs? And where could I find such
a
> spring compressor? NAPA?
>
> I know its possible to compress the springs by using the weight of the
> car/engine as I have done it before. But in this case, the engine is not
in
> the car yet. Plus I have another front end that I would like to
disassemble
> that is lying on the floor of my garage. I did remove the shock absorber
on
> one end which has allowed the spring to expand but it looks like it still
> is under some tension.
///
/// mgs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
///
|