Enrique,
They are quieter when tighter. Keep in mind, though, that MG valves
are set with large clearances by today's standards, so some click is
normal noise. As they wear, the clearances reduce from valve wear and
recession, which is why clearances have to be adjusted from time to time.
Bob
On Sat, 02 Feb 2002 09:55:58 -0400 "E.Claure" <spanlab@ceibo.entelnet.bo>
writes:
> Hi list, quick question, when valves do the tick tick thing are they
> too
> loose or too tight? Enrique
///
/// mgs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
///
|