mgs
[Top] [All Lists]

Re: Distributor vacuum advance question - MGA

To: mgs@autox.team.net
Subject: Re: Distributor vacuum advance question - MGA
From: Rocky Frisco <rock@rocky-frisco.com>
Date: Fri, 04 Jan 2002 13:48:42 -0600
barneymg@ntsource.com wrote:
> 
> At 11:48 PM 1/3/02 -0600, Rocky Frisco wrote:
> >Scott Willis wrote:
> > >
> > > It did not seem to make any difference so mine is unhooked. A local
> > mechanic said to take it off. I am also curious. Anyone know?
> >....
> >A vacuum advance is really a non-vacuum retard, since its function is
> >called into action when vacuum is lost and the "rest state" is supported
> >by full vacuum. ....
> >
> >When you use lots of "loud pedal" the vacuum goes down and the unit
> >retards the ignition timing. ....
> 
> Not for the MGA.  You are describing the system used on the late production
> MGB where the vacuum is ported from the intake manifold.  The MGA (and
> early production MGB) have the distributor control vacuum ported from the
> venturi of the carburetor, just upstream from the lower edge of the
> throttle plate, where you get effectively zero vacuum at idle, and maximum
> vacuum when the throttle is opened just a little.
> 
> >I think the best place for the vac advance line to come off is the intake
> >manifold; this is where my MGA and all of the Minis I've owned had it.
> 
> Stock MGA never had the vacuum tap on the intake manifold. - always on the
> bottom of the rear carburetor.

Live and learn. My MGA had lots of non-standard stuff from the DPO.

-Rock  http://www.rocky-frisco.com
-- 
Red Dirt Rangers (Rocky on piano): http://www.reddirtrangers.com
JJ Cale Live (w/Rocky): http://www.rocky-frisco.com/calelive.htm
The Luggage Fan Club: http://groups.yahoo.com/group/luggage-fans

///
///  mgs@autox.team.net mailing list
///  or try http://www.team.net/cgi-bin/majorcool
///


<Prev in Thread] Current Thread [Next in Thread>