Dennis,
This is true, but on the B heads the original seat was machined into the head
i.e. not removable. The solution to wear was to cut a lip large enough to
insert a hardened seat. This is where the hardened vs non comes in.
Chad
'72B (with hardened seats)
mg-dennis@mindspring.com wrote:
> I was under the impression, as told by a machinist, That all seats
>manufactured
> these days are hardened. "soft" seats are unavailable.. No one makes them
>"soft"
> anymore.
>
> Dennis
>
> 67 MGB
///
/// mgs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
///
|