Re: getting the MG started.

["mghirsch" <mghirsch@netzero.net>]

The best thing to do after you done all the rest is to make sure there is oil
pressure.  Leave the plugs out, and crank the engine until there is oil
pressure on the gauge. It may take 30-60 seconds if very dry.   Then reinstall
the plugs and start.

This will make sure that there is oil in the passages and journals and will
prevent a dry start.

Maynard Hirsch

///
///  mgs@autox.team.net mailing list
///  or try http://www.team.net/cgi-bin/majorcool
///