Hello Gang,
I need to remove the seats from my '70 B-GT to repair
the 'reclining' mechanism in the squab. However, I am
planning the job here at work (instead of working) and the
car is at home. So I ask:
Are the seat rails bolted to the floor pan with bolts from
above into captive nuts or do the nuts come off the bottom
of the pan? This is non-trivial as the seat rails are frozen in
place. The usual slide forward, slide back procedure would
be plenty difficult.
All advice appreciated.
--
Rick Lindsay
Diamond Geoscience Research
5727 S. Lewis Ave., Tulsa, OK
Voice: +1 918-747-3456
Fax: +1 918-747-8599
///
/// mgs@autox.team.net mailing list
/// (If they are dupes, this trailer may also catch them.)
|