mgs
[Top] [All Lists]

Re: Phosphoric Acid cleaning, was Re: Fused circuits &

To: <ATWEDITOR@aol.com>, <mgs@autox.team.net>
Subject: Re: Phosphoric Acid cleaning, was Re: Fused circuits &
From: "Jeff Fayne" <fayne@attglobal.net>
Date: Thu, 17 May 2001 09:08:52 -0500
> In a message dated 5/17/01 7:41:37 AM, fayne@attglobal.net writes:
>
> << Eagle brand Mag Cleaner still contains Phosphoric Acid and cleans wire
> wheels quite nicely (as well as my wife's Maxima's prone to brake dust
> wheels). Caution is advised on painted surfaces, but I've had no problems
on
> the Dunlops I bought a few years ago >>
>
> Question:  My wires are painted.  Is this a problem?
>
> Jay Donoghue
> 72B
> 72B-GT
> 66 Mustang
>

As are mine. I suggest you try it in small non-noticeable spot, such as on
the inside of the rim. If you don't notice any spotting, discoloration or
paint removal, then you should be ok. I wouldn't leave it soaked on for a
long time, in either case. I wet mine first, spray on a good quantity and
then immediately rinse with clean water within 30 seconds.

I would be careful not to get overspray on the body or surrounding area.

Good luck,

Jeff
'70B

///
///  mgs@autox.team.net mailing list
///  (If they are dupes, this trailer may also catch them.)


<Prev in Thread] Current Thread [Next in Thread>