Hi Lisa Ann,
I don't have a screen on mine so I might be off base here. You really don't
need the clips to hold the grill in place. Just drop it in place and it will
stay (unless someone lifts it off and steals it :( ) Mine's been that way
for years, no problem.
If you really want to put the clips on, try using a curved needle nose
pliers or a curved hemostat. You can typically find curved hemostats at your
local flea market.
Good luck,
Jeff
----- Original Message -----
From: "rexcats" <rexcats@telocity.com>
To: <mgs@autox.team.net>
Sent: Tuesday, May 15, 2001 9:31 AM
Subject: putting in a screen?
> Question? How do you put the screen under the grill on the top of the
> Bonnet for a 79 MGB. It was held in place with six clips, but when you
put
> the screen from British Victoria under the grill it seems to be impossible
> to be able to put the clips back on? There isn't anyway to be able to
come
> from underneath unless one could be small enough to squirm through the
> heater vents! So any advice on this is greatly appreciated.
>
> Thanks
>
> Lisa Ann
///
/// mgs@autox.team.net mailing list
/// (If they are dupes, this trailer may also catch them.)
|