Hi Everybody,
I am in the process of sorting out the floor boards on my TF restoration. I
have only one floorboard and its for the passenger side ( RHD Car ). Can
someone confirm that the basic outside shape is common to each side of the
car ( except for the various recesses machined on the underside ). Also the
plywood thickness, mine is around 10mm.
Does someone have a picture or sketch of the firewall plate ( the sloping
flat metal plate that transmission cover bolts to ). Mine appears to have a
piece cut out of it at a point underneath the starter bendix spring and
where the forward edge of the floorboard ( should ) be supported.
Any info greatly appreciated.
Regards
David Tinker. Wales UK
///
/// mgs@autox.team.net mailing list
/// (If they are dupes, this trailer may also catch them.)
|