Okay, need some advice now. Trying to remove the above mentioned mount.
Used 3/8" threaded rod with the proper sized sockets on either side of the
tail shaft. Reefed on the bolts/washers on the outside of the threaded
rod/sockets and all I accomplished was to snap the rod. Yes, I was removing
it from the proper side, it just seems to be very, very frozen. I've
refrained from bludgening with the BFH as I fear cracking the tail shaft.
I've now committed to this little project and am wondering if anyone has any
advise as to removal of this tuff little bugger.
TIA
Safety Fast!
Gordie Bird
'62 MGA
'80 MGB LE
'86 Audi 4kq
|