No part numbers, but I just had my head redone, and the shop
owner used teflon umbrella seals intended for a 350 Chevrolet V-8,
but just on the intake valves. He used O-rings (also Chevy) on the
exhausts. Don't forget to ask for a 3 (or 4) angle valve grind while
you're at it.
Regards,
Jerry Causey
> Does anyone on the list have a brand name and part number for umbrella
> type valve seals that will fit the bronze valve guides on a MGB. I am
> rebuilding my cylinder head using bronze guides and double springs.
> Any help would be suggested.
>
> John
|