I've never done this, but I've heard that a little heat and you can scrape it
out.
larry Hoy
>-----Original Message-----
>From: owner-mgs@autox.team.net [mailto:owner-mgs@autox.team.net]On
>Behalf Of Doug
>Sent: Thursday, February 15, 2001 9:55 PM
>To: MG
>Subject: Bondo the Magificent
>
>
>After a bit of thought I decided the best thing I could is strip the '65 to
>the metal and see what's left. The stripping isn't a problem, but the Bondo
>bits are a pain. Is there a better way to remove the stuff than just hitting
>it with the wire wheel?
>
>Doug
>'65 pull handle B
|