Re: inertia switch

[Bulwinkle <yd3@nvc.net>]

Scott:

On the old pin ball machines it was called a tilt switch.  What
are you doing tilting your MG?  <<grin>>  All four wheels are to
stay on the ground!  <<very big grin>>

Humor aside, if my 240Z used a relay for the fuel pump activated
by the alternator and start position of the ignition switch.  If
either aren't activated, the fuel pump doesn't run.  This could
easily be incorporated into vehicles without the tilt switch.

Blake

<<<snip>>>
> The Parts Catalogue lists an inertia switch