mgs
[Top] [All Lists]

DPO Inovation

To: <mgs@autox.team.net>
Subject: DPO Inovation
From: " Michael Winney " <winn@goodnet.com>
Date: Tue, 12 Dec 2000 15:51:56 -0700
Definitely not recommended!  Better to solder(not crimp) a 10ga jumper
between the two fuse connections.  This will insure that bonehead
replacements will not fall out and that the smoke will escape from some
weaker part of the circuit! :-)
Mike Winney
68 GT aka "smokey"

Robert Sexson wrote----

> Here is a new DPO quick fix that I found. Cut the heads off of some 1/4
inch
> bolts and use them in the place of fuses.
>
> R. Sexson
> 74.5 B
> 74 Midget [undergoing rebuild]

<Prev in Thread] Current Thread [Next in Thread>