Eric,
I highly recommend Joe Curto Inc. in New York. 718/762-SUSU, the phone
# alone should tell you that hes really into what he does. And what a
wealth of information and hes willing to share it. He has always taken care
of my SU needs. Just give him the # of the SU tag and he'll send what you
need. You may want to have the shafts rebushed.
No $$$$$interest what so ever, just a satisfied customer.
Mark
----- Original Message -----
From: Eric Kolb <macman@magpage.com>
To: MG List <mgs@autox.team.net>
Sent: Thursday, November 16, 2000 9:47 PM
Subject: Rebuilding SU H4s for an MGA 1600 x-mac-creator="4D4F5353"
> Happy Friday (almost!)
> I have a set of SU carbs from a MGA 1600. I would like to know what
> kind of work, or how in depth is it to rebuild them and the best rebuild
> kit to purchase to get them in good shape. The butterfly valves open
> properly and have wonderful spring tension, but the jets seem sticky. I
> have photo if it helps... Also where do I get the proper braided steel
> fuelines for them, I have rubberlines with nifty fittings, but they look
> really bad, really really really bad.
> Thanks,
> -Eric Kolb
|