mgs
[Top] [All Lists]

Re: castle rail repair/replacement advice

To: <Pointparty@aol.com>, <mgs@autox.team.net>
Subject: Re: castle rail repair/replacement advice
From: "bill king" <kingwj@del.net>
Date: Wed, 25 Oct 2000 16:39:31 -0400
Check out this link.  It can get involved and expensive in a hurry.

http://www.mgb.bc.ca/


Bill

59 A
-----Original Message-----
From: <Pointparty@aol.com>
To: <mgs@autox.team.net>
Date: Tuesday, October 24, 2000 8:46 PM
Subject: Fwd: castle rail repair/replacement advice


>
>--part1_bd.82c6083.27278657_boundary
>
>This is a similar inquiry to the one appearing recently about the rocker
>panels, I think, but I need some advise and help and reassurance.
>
> My 71 GT has developed slight rusted through spots on both these lower
side
> members or what are correctly called castle rails by the MG wizzard we
use.
> The damage is modest, less than 5% visible but it won't get better and I
> suspect that it will get worse.
>
> The body is otherwise solid.   At the last repaint, about  9 years ago, we
> had the quarter panel acme and pockmarks properly cut out and repaired
with
> steel patch panels.  No bondo.  The car is a very presentable and
dependable
> regular driver, but not a show car and I want to continue to use it.
>
> Has anyone on the list replaced or repaired these castle rails?  The parts
> seem quite available and reasonable by mail order.   Both replacement
parts
> and original equipment type parts are offerred.  How big a job is
> it?.......How specialized or skilled must a body repair person
>be?.......What
> is involved?........Is the original equipment part(s) superior to the
> replacement part(s)? ........  What is an appropriate amount of time
>involved
> by a compentent body repair person and what is a fair price?
>
> All replies are appreciated.....Thanks
>
> Mel
>
>
>
>
>
>   >>
>
>
>--part1_bd.82c6083.27278657_boundary
>Content-Disposition: inline
>
>Return-Path: <mgs-owner@autox.team.net>
>Received: from  rly-ye03.mx.aol.com (rly-ye03.mail.aol.com
[172.18.151.200]) by air-ye04.mail.aol.com (v76_r1.19) with ESMTP; Fri, 20
Oct 2000 11:33:27 -0400
>Received: from  teamfat2.dsl.aros.net (teamfat2.dsl.aros.net
[207.173.21.42]) by rly-ye03.mx.aol.com (v76_r1.19) with ESMTP; Fri, 20 Oct
2000 11:33:04 -0400
>Received: from localhost (daemon@localhost)
> by teamfat2.dsl.aros.net (8.11.0/8.11.0) with SMTP id e9KFUnZ24170;
> Fri, 20 Oct 2000 09:30:49 -0600 (MDT)
>Received: by teamfat2.dsl.aros.net (bulk_mailer v1.12); Fri, 20 Oct 2000
09:30:37 -0600
>Received: (from majordom@localhost)
> by teamfat2.dsl.aros.net (8.11.0/8.11.0) id e9KFUXa24142
> for mgs-actors; Fri, 20 Oct 2000 09:30:33 -0600 (MDT)
>X-Authentication-Warning: teamfat2.dsl.aros.net: majordom set sender to
owner-mgs@Autox.Team.Net using -f
>From: Pointparty@aol.com
>Message-ID: <87.1ba44cf.2721bf09@aol.com>
>Date: Fri, 20 Oct 2000 11:30:17 EDT
>Subject: castle rail repair/replacement advice
>To: mgs@autox.team.net
>MIME-Version: 1.0
>X-Mailer: Windows AOL sub 106
>Sender: owner-mgs@autox.team.net
>Reply-To: Pointparty@aol.com
>
>My 71 GT has developed slight rusted through spots on both these lower side
>members or what are correctly called castle rails by the MG wizzard we use.
>The damage is modest, less than 5% visible but it won't get better and I
>suspect that it will get worse.
>
>The body is otherwise solid.   At the last repaint, about  9 years ago, we
>had the quarter panel acme and pockmarks properly cut out and repaired with
>steel patch panels.  No bondo.  The car is a very presentable and
dependable
>regular driver, but not a show car.
>
>Has anyone on the list replaced or repaired these castle rails?  The parts
>seem quite available and reasonable by mail order.   Both replacement parts
>and original equipment type parts are offerred.  How big a job is
>it?.......How specialized or skilled must a body repair person
be?.......What
>is involved?........Is the original equipment part(s) superior to the
>replacement part(s)? ........  What is an appropriate amount of time
involved
>by a compentent body repair person and what is a fair price?
>
>All replies are appreciated.....Thanks
>
>Mel
>
>
>
>
>
>
>
>
>--part1_bd.82c6083.27278657_boundary--
>


<Prev in Thread] Current Thread [Next in Thread>