Re: Power Curve of B-Series Engine

[<paul.hunt1@virgin.net>]

The Leyland Workshop Manual quotes 110 lb.ft. at 3000 rpm for the HC and 105
lb.ft at 3000 rpm for the LC, both significantly higher than the 80/63
quoted here.  Any ideas why?

PaulH.

----- Original Message -----
From: Bullwinkle <yd3@nvc.net>
To: mgs <mgs@autox.team.net>
Sent: Saturday, October 07, 2000 6:11 AM
Subject: Re: Power Curve of B-Series Engine


> This came out of a Brooklands book and was originaly printed as a test in
"The
> Motor" September 26, 1962.  It's in the form of a line graph, but as
> autox.team.net doesn't support attached graphics, I'll give it as a chart.
> ...