Greetings:
I looked at http://www.team.net/www/morgan/tech/tuning.html and found the data
interesting.
Several years ago, I also made a chart on needles. I used DOS based Microsoft
Works Spread Sheet and entered the data from an old SU book I have. I then had
Works create a line graph for me. It basically shows me the same information
that the Excell sample did. I was using it to help determine the best needle of
the several recommeded for a stage II TD, a MK II TD, or a 1250 TF. Some of the
needles were quite different in profile. A picture is worth a thousand words.
Blake
|