At 11:51 PM 8/29/2000 -0400, Enrique Claure wrote:
>Hi list, if you put in a cam other than the stock cam will your valve
clearances need to change from stock e.i 0.13 or 0.15 inch?.
Yup, that's a definite qualified maybe. Please consult the cam supplier.
My original MGA valve clearance spec is .017" hot. My Crane Cams upgrade
street cam says .014" intake and .016" exhaust, also hot. Forget the
original spec when changing cams. Go with what the cam manufacturer wants.
Barney Gaylord
1958 MGA with an attitude
http:/www.ntsource.com/~barneymg
|