mgs
[Top] [All Lists]

MGTD pulley Belt

To: <mgs@autox.team.net>
Subject: MGTD pulley Belt
From: "Mike Razor" <mrazor@mis.net>
Date: Sat, 12 Aug 2000 12:45:15 -0400
Have a 39 inch belt, it is to long, generator is adjusted all the way
out and at times it bangs on the hood..  Got a 38 inch belt and the
generator is adjusted all the way in and the belt will not make it all
the way around the required pulleys.
Can't figure it out.  I know that one less inch extrapolates out quite
a bit after it winds it way around the pulleys, but it is only an inch
less than the old belt and I have at least 1 1/2 inches of adjustment
on the generator.
Mike R


<Prev in Thread] Current Thread [Next in Thread>