What you say is true, Charles, if one is going to replace bearings or gears
in a differential. However, the replacement of thrust washers can be done by
the "weekend warrior" and requires no "specialized tools and guages", except
for a long thin punch to drive out a roll pin.
Lawrie
British Sportscar Center
-----Original Message-----
From: Charles Sorkin <cdsorkin@ix.netcom.com>
To: MGs List <mgs@autox.team.net>; cessna@speakeasy.org
<cessna@speakeasy.org>
Date: Saturday, July 29, 2000 6:41 PM
Subject: Re: rear end shims/clunk
(SNIP)
>There is very little that the weekend warrior / do-it-yourself types can do
>with a differential, unless you have lots of specialized tools and guages.
|