My manual states to fill to 1/4" of the top of the piston. However, as soon
as you insert the damper, it will displace some of that oil. So I always
fill it about 1/2" from the top of the piston or roughly what would be full
when the damper was inserted.
David
67 BGT
71 BGT
At 03:50 PM 7/11/2000 -0400, Phillips, Frank wrote:
>Greetings,
>
>I am in great need of a carb tuning. I plan to start tonight but have a
>question. How much motor oil (20W50) should I put in the piston of a 1968
>MGB? I've been reading the "Tuning SU Carbs" page on The MGB Experience web
>site (GREAT site) and it states "fill the damper" but does not define
>"filled". 1968 had an AUD265. Thanks...
>
>Frank Phillips
>Email: fwp@ufl.edu
>1968 MGB http://plaza.ufl.edu/fwp/mgb.htm
>
|