Paul, I took pictures of the plumbing as it goes though the fire wall
prior to removing the A/C from my GT parts car. They are already
online at:
http://www.itwest.net/~lundgren/mg-pictures/
The dryer wasn't installed when I got the car, nor the compressor.
On Sat, 24 Jun 2000 11:04:39 -0400, wizardz wrote:
>Hi Bud,
> hhmmm... I'm just about to do the dead opposite.
>Add A/C in.
>
>Do you have the squarish bodied compressor that
>somewhat hangs from the big adapter plate and has
>the alternator kind of on top of the plate?
>
>What bracket are you looking for? The little adjusting strap that
>would go on the bottom of a stock mounted alternator?
>
>Your top mounts should be OK as is, you just need bolts.
>
>Could you, would you.... snap a photo or 2,3... of the A/C hardware
>as installed as you start to take it apart. Mainly, trying to
>show as much 'position' and 'mount bracket detail as possible.
>That is... dryer mount location, condenser plumbing
>routing etc. If needed I could send you one of those 'one use'
>cameras. I have a few, but very blurry, photos my A/C it's PO
>took, but he really didn't show any system detail.
>What I really need is what the stack (compressor/alt) looks like, hose
>routing
>and ducting etc.
>
>Any help here would be greatly appreciated.
>To me at a minimum.... it's worth the bracketry you.
>I could possibly just send you mine as I remove it, or I'm sure
>I probably have one laying around.
>
>TIA
>
>Paul Tegler wizardz@toad.net http://www.teglerizer.com
>
>
>
>
>-----Original Message-----
>From: Bud Krueger <bkrueger@ici.net>
>To: MG List <mgs@autox.team.net>
>Date: Saturday, June 24, 2000 8:37 AM
>Subject: Alternator mounting parts needed
>
>
>>The a/c is coming out of my 77B. I've had enough of its blocking access to
>the
>>distributor, oil filter, overflow tank, etc., etc., as well as being an
>>obstruction in front of the radiator. The problem is that the alternator
>is
>>being driven from the compressor. I need to get my hands on an alternator
>>bracket (Moss MGB11, p. 8 #70, 460-315 [NA]) and an adjusting link, 460-325
>(#68
>>on p.8). Would anybody happen to have these pieces? TIA.
>>
>>BTW, after I remove it, I'll probably put the a/c system up for grabs at
>$300.
>>
>>--
>>Bud Krueger
>>http://home.ici.net/~bkrueger/
>>52TD x2
>>77MGB
>>
>>
>
>
Andrew Lundgren
Lundgren@iname.com
http://www.itwest.net/~lundgren
|