Hi list,
I still can't get my starter to turn. I checked voltage at the small white
green and when I turn the key the voltage goes up to 7.5Volts? is this
correct? I thought all voltage is supposed to be 12V?
They starter relay clicks so I guess that works.
I got under the car and wired the starter directly by joining the brown +
cables to the negative bolt. The solenoid clicked so that works.
I tested the darn starter before I installed it and I would hate to remove
it after so much work.
For on board testing should I join the small and large spades and put
battery positive to the brown cables and negative to the starter body? (I
forgot how I tested out board)
thanks for any suggestions, Enrique
|