Actually, if the original was an 8 ohm speaker, buy two 4s and put them in
serially. If the original was 4 buy to 8s and put them in parallel. That will
keep you balanced. You will have less volume out of the two speakers than one
single one would, but you will be transfering the same amount of power, so your
radio will be happy.
On Thu, 15 Jun 2000 Nferre@aol.com wrote:
> Hi,
>
> There is a way to do this.....connect the speakers in series...this will give
> 1/2 of the radio's output (as 2 4 ohm speakers in series equals 8 ohms.)
>
> Do not connect them in parallel....2 4 ohm speakers in parallel equals 2
> ohms...twice the power output but also twice the current demand....and the
> factory BL radio will quickly burn up its output transistors.
>
> Hope this helps.
>
> Nels Ferré
> 79 MGB
>
|