A crowsfoot wrench works best, My line (steel ) above the bracket where the
hose connects is
cut ans a compression fitting was installed, Works great as ypu now have more
room to resecure everything to the bracket. Might pay to cut the line and do
the same.
remove the section of line then the hose. Carl E.
"M. Edwin Vaughan" wrote:
> Hello Folks,
>
> I am ATTEMPTING to rebuild my clutch slave cylinder and decided to follow
> the advice of the list and replace the flexible hose between the cylinder
> and the steel line. One problem, I can't get the flexible hose loose from
> the steel line. There is not much room to work around there and I am
> puzzled as to how to loosen the sum-a-gun. What's up?
>
> TIA,
>
> Edwin
> '77 B
>
> "I'm tryin' to think but nuthin' happens."
> -- Curly Howard (the stooge)
>
> The MG Filling Station
> http://www.fortunecity.com/silverstone/seatbelt/572
|