Max Heim <mvheim@studiolimage.com> wrote:
> Dragging could be caused by a piston not retracting properly in the
> caliper. Don't recall if you had rebuilt them or not. If not, I'd look
> for rust or old, stiff seals. If so, then incorrect seal installation or
> scratches/rough spots on a piston. Though it would be surprising if this
> happened on both sides. A leak or loose bleeder valve might cause them
> fail to retract, also, but you would notice mess or the lack of brake
> pressure first, I would think.
Calipers were rebuilt by White Post about 2 years ago.
M.
|