One does not cuss your MG, one might refer to the lack of parental identity
of the manufacturers. Don't be surprised if you need to rebuild the slave
right away. Seems to happen after rebuilding the clutch master cylinder.
Dave - recently rebuilt both on 72 B
-----Original Message-----
From: Robert Sexson <rsexson@excite.com>
To: mgs@autox.team.net <mgs@autox.team.net>
Date: Friday, April 07, 2000 8:27 AM
Subject: Clutch master cyl.
>
>I removed the clutch master cyl. yesterday and disassembled. The rubber cup
>was folded up on the side of the spring. I installed new kit and
reinstalled
>the cyl. in the B. Bleed the system and it seems to work fine. Has about an
>inch of slave travel and no leaks.
>
>Another question. Has anyone, other than me, cussed when removing and
>reinstalling the DARN thing?
>
>R. Sexson
>74.5 B
>
>
>
>
>
>Get 100% FREE Internet Access powered by Excite
>Visit http://freelane.excite.com/freeisp
>
>
|