I need to know if there is a spring and washer that holds up the nipple on
the end of the wire that the horn push piece makes contact with, or how
that hold deal works. Some Rocket scientist changed the original steering
wheel with a grant steering wheel (Real jury rigged job). The car had no
horn, ( needless to say the horns were missing to, but have been replaced)
I have replaced the wheel with the original, but the push piece doesn't make
contact with the wire nipple. All I have is the wire with a C clip on the
nipple, and a round plastic bushing. It looks like there should be a spring
or something in there to hold the nipple up so that when push in, it will
make contact. Any body know what I am missing?
Andy 66B
|