mgs
[Top] [All Lists]

Re: carb suffocating

To: barrier@bconnex.net
Subject: Re: carb suffocating
From: Bob Howard <mgbob@juno.com>
Date: Fri, 31 Mar 2000 15:26:01 -0500
Barrie,
  I'll remember this, and next time I bake old cannister charcoal in the
oven I'll be able to tell my wife that you said it was OK to do. Wonder
which would rank the kitchen worse--charcoal from the cannister or
charcoal from the fishtank filter? 
   You're quite on target, I did forget the HS chemistry lesson.
Bob

On Thu, 30 Mar 2000 17:54:38 -0500 Barrie Robinson <barrier@bconnex.net>
writes:
> Bob,
> 
> You do not even have to use new charcoal - Just bake it in the oven 
> for
> 10-20 mins and it re-charges itself (see schoolboy chemistry) but 
> charcoal
> sellers/filters do not like you to know this.
> 
> 
> At 03:09 PM 3/30/00 -0500, Bob Howard wrote:
> >Dave,
> >  Replacing the charcoal in the cannister is pretty easy.  Unscrew 
> the
> >bottom, stand back while the spring tosses charcoal granules 
> skyward,
> >remove whatever is left.  Reassemble with new charcoal from the 
> fish
> >department of your local pet store, make a new filter pad of 
> scotchbrite
> >to replace the rubber one that is probably shot, screw the bottom 
> back on
> >and the job is done.
> >Bob
> >
> >
> >On Wed, 29 Mar 2000 21:47:27 -0600 Dave <hearts@radiks.net> writes:
> >> Heres an interesting one. My '76B started losing power and seemed 
> to 
> >> die
> >> on acceleration.
> >>  Felt like the choke was stuck closed. It was not. Took the 
> >> crankcase
> >> ventilation hose off the
> >>  carb and it ran 90% better. Took the vacuum hose from the 
> charcoal
> >> canister off it ran 110%
> >>  better! Put them back on-same problem. I also have the hose from 
> 
> >> the
> >> valve cover to the
> >>  canister off. Running great. I'm tempted to leave it as is. 
> Great
> >> starting and power. My
> >>  guess is a plugged charcoal canister. All expertise appreciated. 
> 
> >> Thanks
> >> guys.
> >> 
> >
> >
> Regards
> Barrie Robinson
> barrier@bconnex.net
> 
> 

<Prev in Thread] Current Thread [Next in Thread>