The rears (on my 73 roadster and 75 factory V8, Salisbury/tube axle) are 1
5/16". The front hub nuts are 1 1/8".
PaulH.
----- Original Message -----
From: Matthew Trebelhorn <matttrebelhorn@netscape.net>
To: Steve Darby <elan@efortress.com>; Dodd Kelvin <doddk@mossmotors.com>
Cc: <ATWEDITOR@aol.com>; <mgs@autox.team.net>
Sent: Friday, March 24, 2000 11:21 PM
Subject: Re: [Re: Wire wheel hub nut size]
> The original question (at the bottom of this message) was to the SIZE of
the
> said nut. Brands of usable sockets are nice to know, but size was the
> original request.
>
> M.
>
>
> Steve Darby <elan@efortress.com> wrote:
> > The Craftsman socket fits. I even have a Tiawan made one I ground down
> > Steve Darby
> > Sports Cars Int'l
> >
> > Dodd, Kelvin wrote:
> > Someone get me the an available brand on this bloody socket, and I will
>
> > know a Snap On socket will work, but I'm looking for maybe Sears or SK.
> > >
> > > Kelvin.
> > > >
> > > > -----Original Message-----
> > > > From: ATWEDITOR@aol.com [mailto:ATWEDITOR@aol.com]
> > > > Sent: Friday, March 24, 2000 12:50 PM
> > > > To: mgs@autox.team.net
> > > > Subject: Wire wheel hub nut size
> > > >
> > > >
> > > > What is the size of the nut holding the wire wheel hub on to the
rear
> axle of a '72?
>
>
>
|