Are you speaking of the brass junction that splits the lines and also holds
the brake failure switch? I hope not! If this part has been removed and you
do not have it in a parts box...Moss sells it for about $500. I think this
is the most expensive little part I've seen! If you don't have it, check
with the list or the Spridets list (Spridgets@autox.team.net). YOu mention a
piston frozen...Are you refering to the Brake Master Cylinder? If so, you
can pick them up,new, for about $150-$180.
Do you have the Bentley Manual on the 1500 Midget? I do recommend it but if
not, I'll check mine tonight and send you another email.
If your not on the Spridets list, I highly recommend it. Don't get me
wrong...there is a WEALTH of knowledge on this list as well!
Good luck,
Dan Dwelley
77 Midget
Alexandria, Va.
On Wed, 22 Mar 2000 06:42:35 +0100, James K. Hurd wrote:
> I am in the process of rebuilding the brakes on my '75 Midget 1500. The
> brake line junction just forward of the master cylinder ("pressure
> warning assembly" in parts catalog) was removed and I would like to know
> what to look for in there. A piston of some sort is frozen in place. I
> can't find any schematics and would like to know if this rather pricy
> part can be rebuilt. Any help y'all can offer will be appreciated.
>
> Jim
>
>
Dan Dwelley
77 Midget
Alexandria, Va.
Get 100% FREE Internet Access powered by Excite
Visit http://freelane.excite.com/freeisp
|