You should have about 1/2" of travel at the slave, much less than this is an
indication of air in the system. If you are having trouble bleeding the
system try reverse-filling from the slave with a Gunsons Eezi-Bleed, details
on the site below - select 'Spanners', 'Clutch' and scroll down to
'Bleeding'. Another cause of insufficient travel is worn clevis pin and
holes at the pedal and m/c.
PaulH.
----- Original Message -----
From: Ken Waringa <kwaringa@dynsys.com>
To: MG <mgs@autox.team.net>
Sent: Thursday, March 09, 2000 2:08 PM
Subject: No reverse
> We got the newly purchased 79 MGB going last night. It shifts and runs in
> first gear great, no grinding and very smooth. The problem is that is
won't
> go into reverse, just grinds. I haven't done any troubleshooting at all
> yet. I wondered if anyone had any idea what to look for. Hopefully
> something minor, but I have my doubts.
>
> Thanks,
>
> Ken Waringa
>
>
|