The allen-headed set screws should be available at any auto parts or
industrial hardware store under the Dorman brand, part number 380-057,
described as a Set Screw, Cup Point, SAE 7/16" x 5/8".
They cost (usually) $1.25 each
Lawrie
British Sportscar Center
----- Original Message -----
From: MGB <MGB@shoyer.com>
To: <ATWEDITOR@aol.com>
Cc: <mgs@autox.team.net>
Sent: Wednesday, January 05, 2000 9:41 AM
Subject: RE: Detox procedure clarification requested ...
> I got some from Flying Circus English Cars in North Carolina. Their web
> site is http://www.flyingcircuscars.com, or (919)596-4250. I think they
> were pretty cheap, but there's still the shipping cost. They look much
> better than the long bolts. Other dealers on the list might also have the
> screws.
>
> --Steve (1980 MGB)
>
> -----Original Message-----
> From: ATWEDITOR@aol.com
> Cc: mgs@autox.team.net
> Sent: 1/5/00 10:00 AM
> Subject: Re: Detox procedure clarification requested ...
>
>
> In a message dated 1/5/00 4:55:58 AM, barneymg@ntsource.com writes:
>
> << If you really want to make it
> look nice use socket head set screws for plugs.
> >>
>
> I spent months looking for those neat little set screws in the right
> size,
> going from store to store, but failing to find the right size/thread
> combination. I settled on ugly old bolts, but would like to replace
> them.
> Any hints on sourcing?
>
> Jay Donoghue
> 72 MGB
> 66 Mustang
> Looking for a 68-72 GT w/OD
>
|