Re: Tech/mech Overdrive Question

["Dennis and Kathy Skog" <skog@whidbey.com>]

>OK, I went out to the garage to take care of this.  Took off the nuts at
the
>brake plate, and did a little whacking with the dead-blow hammer, but it
just
>doesn't want to budge at all>

Phil,
I separated the overdrive at the brake ring (must also remove the flange) .
That gave me access to the snap spring.
I didn't have to use a hammer, just an old dull screwdriver to slid the snap
spring off the end of the shaft.
Good luck,
Dennis Skog