My conversion back to SU carbs required me to use a longer choke cable. A
Previous Owner had cut both it and the throttle cable for the conversion to a
Weber (which is now in a box on my garage floor) The car started right up
after the rebuild and install. Now for the tuning.....
Anybody have a good trick for getting the choke cable back through the
"shielding"? I can't get the longer one (from the parts car) back through the
metal shielding any longer than about 18 inches (that was accomplished using
the 1/4" at a time with a pair of pliers method) The cable isn't frayed, it
just gets hung up midway through.
I also can't get the *@^(#$ cable holder out of the dash. I thought that if I
could do that I'd be able to straighten the thing out and get the upper hand.
As always, any comments are appreciated.
TIA,
Tony Woodruff
67 MGB
|