That sounds correct. In the stock system I believe there is a metal ring
in the pipe side which makes it difficult to install the donut metal side
down.
-JW
At 07:56 PM 9/21/99 -0400, Rick Brown wrote:
>If you will remember last week the rear muffler on my 74 BGT daily
>driver fell off - just as I was getting ready to go up to Stowe for the
>British INvasion. I got a Stainless Steel system from Moss and arranged
>for Midas to install it the day before I left. Well it seems the Midas
>guys didnt know which way to put on the donuts (gaskets) and they have
>disintegrated - getting new gaskets tomorrow - and will install them
>myself this time. I Just want to make sure they go on correctly this
>time - can anyone tell me which end goes into the exhaust pipe and which
>end into the manifold? I assume its the Metal end which goes into the
>Manifold with the asbestos end in the pipe?
>
>Thanks
>
>Rick
>Reduced to driving the 88 Volvo with 247,000 miles on it
>
John Walker
john@rmartin.net
drone@d23.com
============
~= Early 1974 MGB =~
============
In Progress :)
|