Taking a WAG here, but could it be the coil boost wire? I.e. what on a
later MGB would be the red-white from the solenoid to the coil that supplies
12v when cranking?
PaulH.
http://freespace.virgin.net/paul.hunt1/
(or if that URL doesn't work try )
(http://194.168.54.52/paul.hunt1)
-----Original Message-----
From: Dan Dwelley <ddwelley@excite.com>
To: mgs@autox.team.net <mgs@autox.team.net>
Date: 08 September 1999 20:55
Subject: Wiring question
>Ok folks,
>
>I've been racking my brains and bugging the hell out of my friends. This is
>LBC related...in a way...
>A GM wiring harness has a couple of connectors for the ignition switch; a
>clear connector and a black connector. The black connector has two wires; a
>power wire and an accessory wire. The clear connector has 4 wires; a power
>wire,ign. run, ignition start, ign coil. The harness has another wire that
>goes from the fuse box to coil positive. Here is the question. On the
>standard MG ignition switch, there are 5 wires Brown (Power), Slate (anti
>run-on), white/green (accessory), White (run), white/red (start). Based
upon
>this, every wire is used except the ignition switch coil wire from the
clear
>connector. Where would this wire connect? Would it pair with the White and
>White/red, just the white...? Does anyone have a GM vehicle that could
check
>where this wire goes or have knowledge of the GM wiring for the ignition
>switch. I know there are engine builders here so someone must have some
>ideas for me.
>
>Sorry this message is so long and I want to thank everyone in advance for
>any help they may give me.
>
>Dan Dwelley
>77 Midget
>Alexandria, Va.
>
>Dan Dwelley
>77 Midget
>Alexandria, Va.
>
>
>
>
>Get FREE voicemail, fax and email at http://voicemail.excite.com
>Talk online at http://voicechat.excite.com
|