One problem that I had with my '74 B was that the mechanical advance weights
in the dizzy had frozen to the center shaft so I was getting no mechanical
advance
and therefore no power.
It's worth a check.
-JW
At 01:14 PM 9/2/99 -0700, Steve Buche wrote:
>Imagine, if you will a 69 MGB, with no power - it starts and runs - and
>the following compression readings - (starting from the front of the
>engine) 145lbs, 150lbs, 35lbs, 35lbs. Imagine that :-)
>
>I am just starting life as a MG owner and need some advice. Looking at
>the two shop manuals that came with the car I find little in the way of
>trouble shooting information and therefore, before I begin to operate on
>this LBC, I thought I would solicite some sage and wise advice. Any
>suggestions?
>
>
John Walker
john@rmartin.net
drone@d23.com
============
~= Early 1974 MGB =~
============
In Progress :)
|