--part1_c0ec7ae3.24ef5563_boundary
--part1_c0ec7ae3.24ef5563_boundary
Content-Disposition: inline
Return-path: VSchus8282@aol.com
From: VSchus8282@aol.com
Full-name: VSchus8282
Message-ID: <aafaae4.24eeeda2@aol.com>
Date: Fri, 20 Aug 1999 13:42:58 EDT
Subject: Wheel colour and T.D.C. question
To: owner-mgs@autox.team.net
MIME-Version: 1.0
X-Mailer: AOL 4.0 for Windows 95 sub 21
I recall seeing a recommended paint for wire wheels for a 65 mgb. I believe
it was from Universitymotors ltd.com, but I can seem to locate the article .
The color recommended was a ford silver followed by clear coat. Does anyone
have the complete color name?
Also, I am trying to replace a distributor drive for my car. The book says to
line the grove in the crank pulley with the pointer, this puts the 1 piston
at t.d.c. The book says the 1 valve gear should have clearance and the 4
valve gear should rock. The book says the 1 piston should be on the
compression stroke. It does not make sense that the 1 cylinder should have
valve clearance (does this mean open?)and still be on the compression stroke.
Thanks for any help
Vic
65 MGB
--part1_c0ec7ae3.24ef5563_boundary--
|