Hard to say on so little information. There could be many causes for your
rich condition. What shape are your carbs in, espceially the jet seats?
John
Jouke Bloem wrote:
> Hello,
>
> Yesterday we have been busy all day setting op the engine of my 'C GT'
> properly. The problem we encountered was a too rich mixture. We found
> out there is a 'km' needle in the carburettor. The number on the carb is
> AUD287. My new workshop manual says we should have a 'st' needle as
> standard. The ignition timing that goes with this setup is 10 degrees
> instead of 20.
>
> Can someone tell me more about this needle thing. For instance can i
> change the needle to st and set the ignition to standard to get a better
> and leaner running engine?
>
> TIA
>
> Jouke Bloem
> '68 MG C GT
|