Bud, I did this recently, I don't have AC. I bought a 1/4" square drive
7/16" flex socket so I could get to the front pan bolts.
Good luck.
Larry Hoy, Denver, CO USA
1970 MGB Daily Driver ~ 1967 MGB Vintage Racer ~ 1969 MGB Undergoing V8
conversion
http://home.cwix.com/~larryhoy@cwix.com/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> -----Original Message-----
> From: owner-mgs@autox.team.net [mailto:owner-mgs@autox.team.net]On
> Behalf Of Bud Krueger
> Sent: Saturday, July 31, 1999 4:35 PM
> To: MG List
> Subject: MGB pan removeal
>
>
> Help, please:
>
> Attempting to remove the sump from my 77B while the engine
> is still in the
> car. Am I going to have to release the motor mounts and jack up
> the engine to
> loosen the front sump screws. If so, the PIA a/c compressor is
> blocking the
> right side motor mount. TIA.
>
> Bud Krueger
> 52TD
> 77MGB
>
>
|